de PierreH » 17 Nov 2017 19:32
Hello Tom,
it is absolutely forbidden to remove these screws : they keep aligned lenses and vertical slider of the optical zoom.
It would be a nightmare to adjust the whole zoom system !
I don't think that the screws that held your system are inside microscope housing :
because the two parts of the microscope housing (top and bottom) are kept together with 3 long screws that you access at the bottom side.
- bottom
-
Image3red.jpg (160.06 Kio) Vu 5816 fois
But this is not what you need to do :
I think (in fact, I am pretty sure) that the black plate that hold the motor is screwed with the same 2 screws that hold the microscope housing to the microscope holder.
These 2 screws are circled in blue on the photo.
You have to remove the black rectangular part to see these 2 screws...
Microscopes Zeiss WL, CP, DIC, épifluo, épiscopie HD, obj. Neofluar Phase, Plan-Neofluar 63, Optovar, écl. LED Seoul P4 3W
Stéréomic. Leica MZ12.5 Combi 3 Planapo 1x 2x, OPD Planapo 10x, écl. Schott KL1500LCD. Leica M3Z Plan Type S
Terrain Open University McArthur LED, Nikon Naturescope Mini, Emoscop SME LED, Belomo x10
Photomacroscope agrand. Kaiser modifié, Luminar 16mm, Apo-Rodagon N 50mm 2.8, Nikon CF 10 & 20x Plan EPI
APN Canon 450D téléc. USB, Fuji X10 Raynox DCR-250