Bonjour à tous
Afin d'avoir une plaque chauffante régulée, celle ci sera modifiée pour intégrer un sytème de régulation
Cahier des charges
La plaque chauffante sur mon premier post consomme 500 watts max
500 watts :220 volts = 2,3 ampères
Il faut un régulateur avec un pouvoir de coupure minimum de 3 ampères
Une sonde de température pouvant supporter une température au delà de 350 °
Pouvant fonctionner sur 220 volts
Un petit prix moins de 20 euros avec la sonde
Voici ce que j'ai trouvé pour un prix de 15 euros
Features:
Dimensions:48mm×48mm×110mm(APP)
Measuring accuracy: ±0.5%FS
Cold-end compensation tolerance: ±2℃(can be modified by software in 0~50℃)
Resolution: 14 bit
Sampling cycle: 0.5 Sec
Process value (PV), Setting value (SV)
Output, alarm and self-tuning can be indicated by: LED
PIN control (including ON/OFF, step-type PID and continuous PID)
Self-tuning control
Relay output: contact capacity 250V AC 3A (resistive load)Alarm function output: 2 way
Contact capacity of output: 250V AC 3A (resistive load)
Setting value (SV): identical to measuring range (PV)
Proportional band (P): 0~full range (ON/OFF control when set to 0)
Detective temperature range:0 to 400℃Insulation resistance: >50M ohm(500V DC)
Insulation resistance: 1500V AC/min
Power Consumption: 10 VA
Service environment: 0~50℃,
environment with no corrosive gas 30~85% RH
Cable Length: 1M
Sensor diameter:4.5mm
Temperature rang :0-400℃Internal Insulation: Fiberglass
External Shielding: Insulated Shielding
Lien
http://www.ebay.fr/itm/Regulateur-Tempe ... 461b042f1fPdf
http://www.rkcinst.co.jp/english/pdf_ma ... zc17e3.pdf