Bonjour Catherine, Paüle, tous,
Merci beaucoup pour le temps que vous m'avez consacré afin de m'aider à identifier cette diatomée.
J'ai passé ce matin beaucoup de temps à regarder d'autres lames de Saint-Laurent, je n'ai pas retrouvé d'autres spécimens...
A bien regarder je pense que, faute de mieux, cette
Cyclotella gamma, y ressemble bigrement
Voici la description qui en est faite à partir du site
https://diatoms.org/genera/cyclotella :
"Valves are cylindrical with a transversely undulate central area that occupies about half the valve diameter. One or two central fultoportulae are clearly visible in LM on the convex (raised) portion of the central area. The central area is otherwise colliculate with scattered nodules, or is unornamented. Striae are equal in length and multiseriate near the valve margins. Striae become uniseriate nearest to the valve center, where individual areolae are easily distinguished in LM.
Internally, alveoli are partially occluded by a central lamina, creating a distinct concentric ring (also called a shadow line) through the striae about one-third of the distance from the central area to the valve margin. Another concentric ring near the valve margin represents the distal internal occlusions of the alveoli (Håkansson 2002, Houk et al. 2010, Lowe 1981)."
-
Cyclotella_0173.jpg (146.59 Kio) Vu 1614 fois
-
Cyclotella_gamma_origimag001.jpg (36.48 Kio) Vu 1615 fois
Toutefois, on ne retrouve pas la zone convexe au niveau de l'aréa centrale ni le ou les fultoportules mais mon spécimen semble abîmé
...